| Product Model | TPS1H100BQPWPRQ1 |
|---|---|
| Manufacture | TI |
| Description | IC POWER SW 14-HTSSOP |
| Stock | Available |
IC POWER SW 14-HTSSOP
Texas Instruments TPS1H100BQPWPRQ1 is an automotive-qualified, single-channel smart high-side power switch in a 14-pin HTSSOP package, integrating an NMOS power FET and charge pump for intelligent control of resistive, inductive, and capacitive loads in power-path, reverse-polarity protection, and body-electronics applications.
Wide Operating Voltage and Ultra-Low Standby Current
The TPS1H100BQPWPRQ1 operates across a 3.5 V to 40 V input range, accommodating 12 V and 24 V automotive battery rails with margin for load-dump transients, while its standby current is specified below 0.5 µA to minimize parasitic drain on the battery during vehicle off-states. The input control interface is compatible with both 3.3 V and 5 V logic, easing direct connection to automotive MCUs without level shifting.
High-Accuracy Current Sense and Programmable Current Limit
The TPS1H100BQPWPRQ1 (Version B) provides an analog current-sense output with ±30 mA accuracy at 1 A and ±4 mA at 5 mA, enabling precise load monitoring for diagnostics and closed-loop protection. A programmable current limit is set via an external resistor with ±20% accuracy at 0.5 A, allowing the switch to be tailored to the specific inrush and steady-state profiles of body-electronics and power-path loads.
Comprehensive Protection and Automotive Qualification
The TPS1H100BQPWPRQ1 integrates overload and short-circuit protection, inductive load negative voltage clamping, undervoltage lockout (UVLO), thermal shutdown with self-recovery, and loss-of-GND/loss-of-supply protection, with reverse-battery protection achievable through external circuitry. The device is AEC-Q100 qualified to Device Temperature Grade 1 (−40 °C to 125 °C ambient), rated for operation up to 150 °C junction temperature, and tested to ISO 7637-2 and ISO 16750-2 electrical transient immunity standards. It is housed in a 14-pin thermally enhanced HTSSOP (PWP) package measuring 4.4 mm × 5 mm, supplied in 2,000-piece tape and reel.
| Parameter | Specification |
| Package / Case | 14-PowerTSSOP (HTSSOP-14, 0.173" / 4.40mm Width) |
| Pin Count | 14 |
| Mounting Type | Surface Mount |
| Packaging | Tape & Reel (TR), 2,000 pcs |
| Operating Temperature | -40°C to 125°C (TA) |
| Moisture Sensitivity Level (MSL) | Level 3 (168 Hours) |
| RoHS Status | ROHS3 Compliant / Green (RoHS & no Sb/Br) |

Texas Instruments TPS1H100BQPWPRQ1 is an automotive-qualified, single-channel smart high-side power switch in a 14-pin HTSSOP package, integrating an NMOS power FET and charge pump for intelligent control of resistive, inductive, and capacitive loads in power-path, reverse-polarity protection, and body-electronics applications.
Wide Operating Voltage and Ultra-Low Standby Current
The TPS1H100BQPWPRQ1 operates across a 3.5 V to 40 V input range, accommodating 12 V and 24 V automotive battery rails with margin for load-dump transients, while its standby current is specified below 0.5 µA to minimize parasitic drain on the battery during vehicle off-states. The input control interface is compatible with both 3.3 V and 5 V logic, easing direct connection to automotive MCUs without level shifting.
High-Accuracy Current Sense and Programmable Current Limit
The TPS1H100BQPWPRQ1 (Version B) provides an analog current-sense output with ±30 mA accuracy at 1 A and ±4 mA at 5 mA, enabling precise load monitoring for diagnostics and closed-loop protection. A programmable current limit is set via an external resistor with ±20% accuracy at 0.5 A, allowing the switch to be tailored to the specific inrush and steady-state profiles of body-electronics and power-path loads.
Comprehensive Protection and Automotive Qualification
The TPS1H100BQPWPRQ1 integrates overload and short-circuit protection, inductive load negative voltage clamping, undervoltage lockout (UVLO), thermal shutdown with self-recovery, and loss-of-GND/loss-of-supply protection, with reverse-battery protection achievable through external circuitry. The device is AEC-Q100 qualified to Device Temperature Grade 1 (−40 °C to 125 °C ambient), rated for operation up to 150 °C junction temperature, and tested to ISO 7637-2 and ISO 16750-2 electrical transient immunity standards. It is housed in a 14-pin thermally enhanced HTSSOP (PWP) package measuring 4.4 mm × 5 mm, supplied in 2,000-piece tape and reel.
| Parameter | Specification |
| Package / Case | 14-PowerTSSOP (HTSSOP-14, 0.173" / 4.40mm Width) |
| Pin Count | 14 |
| Mounting Type | Surface Mount |
| Packaging | Tape & Reel (TR), 2,000 pcs |
| Operating Temperature | -40°C to 125°C (TA) |
| Moisture Sensitivity Level (MSL) | Level 3 (168 Hours) |
| RoHS Status | ROHS3 Compliant / Green (RoHS & no Sb/Br) |

| Product Model | BQ25731RSNR |
|---|---|
| Manufacture | TI |
| Description | I2C 1-5 CELL NVDC BUCK-BOOST BAT |
| Stock | Available |

| Product Model | BQ25155YFPR |
|---|---|
| Manufacture | TI |
| Description | IC BATT CHG LI-ION 1CELL 20DSBGA |
| Stock | Available |

| Product Model | BQ25185DLHR |
|---|---|
| Manufacture | TI |
| Description | 1-CELL, 1-A STAND-ALONE LINEAR B |
| Stock | Available |

| Product Model | BQ24040DSQR |
|---|---|
| Manufacture | TI |
| Description | IC BATT CHG LI-ION 1CELL 10SON |
| Stock | Available |